Laser shaft alignment equipment, Touch probes, Laser tool setting, Laser machine alignment systems, Roll alignment
News & Updates
New Feature! Reports with Photos & Signature
Now you can directly insert photos and a signature into Stealth alignment reports.

Correcting Soft Foot

The importance of correcting soft foot errors demands effecitve laser soft foot measurement

Direct Angle Measurement
Why Stealth Technology is Better over Long Distances

Exceptionally Rugged 8" and 10" Laser Display Screens

Check out the torture tests that Stealth Laser display units were subjected to in development.

Stealth Laser Shaft Alignment Website
Hamar Laser Instruments have launched a new website dedicated to their industry leading STEALTH range of Laser Alignment Systems

FibroDRIVE+ in Australia
New FibroDRIVE+ tables with integrated control & drive allow simple implementation of programmable rotary positioning.

Fibro Rotary Motion
ISTecnik appointed national distributor of Fibro rotary motion systems

Efficient Sole Plate Levelling
Dual axis electronic levels from Digipas shorten sole plate levelling times by 50%.

New Ultra Precision Digital Machinists Level
The 2-axis DWL8500xy is suitable for precision machine levelling to 1 arcsecond in both directions.

TC-76D All New Digital Scanning Probe

The all new TC76D scanning probe from Blum provides large time savings and interesting new probing possibilities.

New Versions of S-680 Laser Shaft Aligner
New S-680BP and S-680BT laser shaft aligners from Hamar put the ultimate alignment precision in reach of more users.

New S-660 Laser System - Affordable Performance
The outstanding Hamar S-660 wireless laser shaft aligner now released in Australia.

New Precision Dual Axis Levels
A new range of 2-axis precision digital electronic machinists levels provides high levelling accuracy and simplicity.

Laser Pump Alignment
Hamar S-670 sets new standards in pump alignment efficiency and ease of use.

CNC Machine Calibration
Fast and affordable CNC machine axis calibration with LICS-100A

Used Laser Shaft Aligner Sale
One used S-680 Laser Shaft Aligner on sale now

Laser Precision Machine Levelling
The Hamar L740 series scanning laser levels provide ideal levelling solution for all machine tools.

Lasers Vastly Improve Pulley Alignments
Reflected beam laser technology provides far superior pulley and belt alignments in rapid time.

Precision Machine Tool Alignment

Hamar Multi-plane Geometrical Lasers Ideal for Aligning Large Precision Machine Tools

Soft Foot in Shaft Alignment
It is impossible to properly align a machine with a soft foot, but as many types of Soft Foot condition exist it is important to understand the possible causes.

ISTecnik Precision Laser Metrology
New Precision Dual Axis Levels

A new range of 2-axis precision digital electronic machinists levels provides high levelling accuracy and simplicity.

The Digi-Pas DWL-3000/3500xy range of precision and ultra-precision 2-axis digital machinists levels now provide installation technicians with a faster and easier electronic levelling technology.
Precision Digital Level in Inclinometer Mode

These high precision digital machinists levels display dual live level readings in X and Y axes. This makes the task of adjusting the level of any machine, base-plate or equipment component in both directions as simple as adjusting both live displayed level errors to the desired accuracy without moving the level. No longer is levelling time controlled by extended bubble settling times and repeated reading and re-reading of bubble positions against vial calibration marks in opposite orientations.

With level measurement accuracy down to 0.001 degrees, equivalent to 0.017mm/metre, even the highest precision machinery may be levelled with the DWL-3500xy unit. Live graphics and a displayed arrow indicate the high side, and level values in degrees, mm/metre or inches/foot are clearly displayed by the bright colour TFT display screen.

When the unit is set down in a vertical orientation the display automatically changes to a precision inclinometer with both an analogue radout and digital display values.

In addition, the unit may be set to Vibrometer mode to display a live vibration waveform allowing a baseline vibration level to be registered or compared against previous values.

The DWL-3000xy and DWL3500xy are supplied with PC Sync software that allows readings to be remotely displayed. Optionally, the software may be upgraded to allow a datalogging sequence to be programmed.

Supplied in a sturdy padded case, these robust high precision electronic levels are suitable for a wide range of high accuracy levelling tasks in manufacturing, medical, mining, construction, transportation and defence industries.

For more information, contact IS Tecnik on 1300 699 176.

Copyright (c) 2007 - 2015 ISTecnik, Hosting by Enetica