Laser shaft alignment equipment, Touch probes, Laser tool setting, Laser machine alignment systems, Roll alignment
 
News & Updates
An Open Letter to Rod Hamar
14-05-2013 

The reasons we like selling Hamar Stealth Shaft Alignment Lasers


Soft Foot in Shaft Alignment
03-02-2008 
It is impossible to properly align a machine with a soft foot, but as many types of Soft Foot condition exist it is important to understand the possible causes.


Archive
 
ISTecnik Precision Laser Metrology
HOME
Pulley PARTNER Hits Australia
02-10-2008 

Newly available - Pulley PARTNER provides advanced simplicity in Laser Pulley Alignment.

The accurate alignment of pulleys and sprockets for belt and chain driven equipment is historically made difficult by the lack of available tools that are suitable to accurately measure pulley alignments over typically large shaft spacings.



Pulley PARTNER and Pulley PRO laser systems provide the ultimate solution for achieving suitable pulley and sprocket alignments in quick time. The patented reflected beam laser technology used by these alignment systems bridges the gap between inferior low accuracy laser systems and expensive and more complicated computer based laser systems, to provide an alignment solution that is so easy to use that no training is required yet accurate enough to allow excellent alignment results to be obtained.



By its clever design the Pulley PARTNER shows horizontal angle error, vertical parallelism and offset errors simultaneously as soon as the laser and target are mounted using their integrated magnetic bases.


The clear visual indication of all alignment errors provided by the line laser gives a direct guide for an untrained operator to adjust the machinery into an aligned position.

Pulley PRO Green has the same capabilities but incorporates an ultra-bright Green Light laser that allows the unit to be comfortably used in outdoor, high light conditions, for shafts up to 5m apart or more.

Refer to Laser Pulley Alignment for more specific detail on these systems.
















For further information or to arrange an on-site demo, call IS Tecnik on 02 9546 5676. or mailto:info@istecnik.com.au
















 






 






 

 
 
 
 
 
Copyright (c) 2007 - 2015 ISTecnik, Hosting by Enetica